Lightware MX2-4x4-HDMI20-CA User Manual page 47


  
6. Software Control – Lightware Device Controller
Analog input balance
Setting the value between -100 and +100 (0 = center).
Video status
The signal format and the detected parameters are described in these sections.
Video status information in the input port properties window
The following signal status information are displayed in this section:
+ 5V present, Signal present, HDCP status,
Color space, Color range, Colorimetry, Overscan/underscan,
HDCP status
The currently applied HDCP encryption level on the input (e.g. HDCP 1.4).
▪ non HDCP signal: the signal is not encrypted.
HDCP 1.4 stream: the signal is encrypted with HDCP v1.4
▪
▪ HDCP 2.2 stream (HDCP 1.4 convertable): the signal is encrypted with HDCP 2.2 but can be converted to be
encrypted with HDCP v1.4. See the corresponding section in
HDCP 2.2 stream (non HDCP 1.4 convertable): the signal is encrypted with HDCP 2.2 and not allowed to
▪
convert and encrypt with HDCP v1.4. In this case the signal can be displayed only on a HDCP v2.2-
compliant sink device.
HDCP stream type, Signal bandwidth, Resolution, Color depth,
Frame Detector.
HDCP v2.2 (the first figure).
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
MX2-HDMI20 series – User's Manual 47