Lightware MX2-4x4-HDMI20-CA User Manual page 103


  
10. Firmware Upgrade
Legend of the Icons
Icon Name
Identify the device

IP address editor

 Further information available
Step 3. Select the firmware package file (*.lfp2). When the file is selected the release note is displayed in the
right window. Please read it carefully.
Press the Open button. The listed devices – which are compatible with the firmware pack – are filtered
automatically in the main screen. Update Options button opens a window, where factory default restore can
be chosen after the firmware upgrade. Press Apply to accept.
Description
Clicking on the icon causes the four front panel LEDs blink
in green for 10 seconds. The feature helps to identify the
device itself in the rack shelf.
To modify IP address settings quickly it is not necessary to
enter the device's settings/network menu, you can set them
by clicking the pencil icon next to the IP address.
Device is unreachable. Change the IP address using the
front panel LCD menu or the IP address editor of the LDU2.
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
MX2-HDMI20 series – User's Manual
Step 4. Select the desired devices and press the Start Update button. The upgrade takes about 10-12 minutes
to finish which is independent of the number of the upgraded devices since the upgrades are
processed simultaneously.
Step 5. After the part of LDU2 software upgrade process is finished, the matrix
starts the self-upgrade procedure. It is an automatic action and no
any user interruption is needed during the operation (the crosspoint
buttons show the status of the process).

Finish. Clicking on the icon, a log information is displayed in the Device
Log window.
103