Lightware MX2-4x4-HDMI20-CA User Manual page 52


  
6. Software Control – Lightware Device Controller
Below the Displayport Link section, the summary of the DP-related settings and status information of the
selected port can be seen.
Status information of the disconnected port
The audio setting possibilities are the same with the HDMI port's. For more details see
Settings section. #status
Status information of the active signal
MX2-HDMI20 series – User's Manual
Video status
The signal format and the detected parameters are described in these sections.
The following signal status information are displayed in this section:
▪
▪
▪
▪
INFO: Take care the deep color support of the emulated EDID in case of 10-bit or 12-bit color depth video
signal. For more information about it, see
▪
▪
General Tab - Audio
Embedded audio
Presence of the embedded audio and the sampling frequency are displayed in Embedded audio section.
CEC Tab
The DisplayPort CEC-capability is similar with the HDMI, so more details about the CEC command sending,
see the
Advanced Tab
See more details about the advanced signal information in section.
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
Video status information in the input port properties window
Signal present
Signal bandwidth
Resolution
Color depth
DisplayPort Video
Color space
Frame Detector
#cec
CEC Tab section.
52
Options.