Device Discovery Window - Lightware MX2-4x4-HDMI20-CA User Manual


  
6. Software Control – Lightware Device Controller
7.3. Device Discovery Window
There are three tabs for the different type of interfaces, select the Ethernet or USB tab.
The Ethernet tab consists of two lists:
▪ Favorite Devices: You can add any Lightware device that is connected via Ethernet and no need to
browse all the available devices. Devices can be added by pressing the Add button or marking the
desired device by the symbol in the All Devices list.

All Devices: The Lightware devices are listed which are available in the connected network.
▪

Device Discovery Window

Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
MX2-HDMI20 series – User's Manual
Establishing the Connection
Select the unit from the discovered Ethernet devices; double click on the device or select it and click on the
green Connect button.
Further Tools
The Tools menu contains the following options:
▪ Log Viewer: The tool can be used for reviewing log files which have been saved previously.
▪ Create EDID: This tool opens the Easy EDID Creator wizard which can be used for creating unique EDIDs
in a few simple steps. Functionality is the same as the Easy EDID Creator, for the detailed information
see Creating an EDID
▪ Demo Mode: This is a virtual MX-FR17 matrix router with full functionality built into the LDC. Functions
and options are the same as a real MX-FR17 device.
The Terminal window is also available by pressing its button on the bottom.
section.
42