Lightware MX2-4x4-HDMI20-CA User Manual page 26


  
4. Front Panel Control
Displayport Status Submenu (Output)
The most important properties of the outgoing signal can be checked
in this submenu:
Link Status
HPD present
▪
▪ Signal present
▪ Signal type
Bandwidth
▪
Lane counts
▪
▪ HDCP
Video Status
Resolution
▪
▪ Color depth
▪ Color space
Embedded audio status
Audio type
▪
▪ Sampling frequency
Advanced
Pixel clock
▪
▪ Total resolution
DP Settings Submenu (Output)
Power enable: DisplayPort is able to provide 1.5 W (500 mA @ 3.3V)
▪
power towards the sink. For more details about it see
Output Settings section.
MX2-HDMI20 series – User's Manual
DisplayPort
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
HDMI Status Submenu (Output)
The most important properties of the outgoing signal can be checked
in this submenu:
Link Status
HPD present
▪
▪ Signal present
▪ Signal type
Bandwidth
▪
HDCP
▪
Video Status
▪ Resolution
Color depth
▪
▪ Color space
Embedded audio status
Audio type
▪
Sampling frequency
▪
Advanced
▪ Pixel clock
Total resolution
▪
▪ Scrambling
HDMI Settings Submenu (Output)
DIFFERENCE: Only the MX2-8X8-HDMI20-AUDIO-L model is able
the 4:4:4 to 4:2:0 conversion and the split function. The availability of
this setting depends on the hardware version of the output board
(V1x_), only in MX2-8x8-HDMI20 model. The hardware version
can be found in Status Tab in the LDC or in the
Menu, Device Info submenu in the LCD.
Conversion #colorspace
The outgoing signal can be routed to the outputs with or without
conversion as follows:
▪ Passthrough: no signal conversion.
4:4:4 to 4:2:0: the signal is converted to the indicated color depth (RGB to YUV).
▪
▪ 4:4:4 to 4:2:2: the signal is converted to the indicated color depth. This feature is supported in case of
HDMI 2.0 signals.
ATTENTION! 10 bit 4:4:4- video signal is converted to 12 bit 4:2:2.
System Settings
26