Sony HR-MPS Operating Instructions Manual page 56

56
System Mode
Pedal Settings
This function makes settings for receiving
data from the pedal(s).
FUNCTION A button: Selects the
pedal configuration.
FUNCTION B button: Memorizes the
setting for when the pedal is in the
"up" position.
FUNCTION C button:
Memorizes the
setting for when the pedal is in the
"down" position.
Pedal configurations
Configuration "Up" "Down"
position position
PgmUp
Performs the
-
K:"og~am up
nct10n.
PgmDw Performs the
hrogram down
-
mct10n.
POLI -
POLI real time
control.
BYPAS
- Switches bypass
on and off.
MIDI 1 Settings
Sets basic MIDI functions.
FUNCTION A button: Sets OMNI
on or off.
FUNCTION B button: Sets the
MIDI channel.
Note:
When transmitting bulk data, be sure
the MIDI channels are the same. For
example, even with OMNI set to ON,
data cannot be transmitted if
different MIDI channels are used for
sending and receiving.
FUNCTION C button: Sets the
memory number corresponding
to the MIDI program change
number 1-128.
FUNCTION A button: Sets the
MIDI program change number.
FUNCTION B button: Sets the
memory number.
FUNCTION D button:
Transmits
bulk dump data.
FUNCTION A button: Selects the
type of bulk dump data to
transmit.
FUNCTION B button: Starts
transmission.
FUNCTION E button: Receives
bulk dump data.
This mode enables bulk dump
data to be input.
The signal lamp lights red when bulk dump
data is being received.
MIDI 2 Settings
Configures settings for receiving MIDI
data.
Sets basic MIDI functions.
FUNCTION A button: Setsfrogram
change receiving on or of .
FUNCTION B button: Sets control
change receiving on or off.
FUNCTION C button:
Sets channel
pressure receiving on or off.
FUNCTION D button: Sets pitch be11"'
control receiving on or off.
-c;...-