Sony HR-MPS Operating Instructions Manual page 24

HR-RCS
DI
24
Play Mode
To activate the tuning mode
with the HR-RCS dedicated
remote controller
Simultaneously press the BYPASS switch
and MANUAL switch.
The tuning status of the input signal is
displayed on the HR-RCS's LEDs.
Keytop LED ... Indicates the closest string.
1/A
1 E string
2/B
2 B string
3/C
3 G string
4/D
4 D string
5/E
5 A string
BANKUP/F
6 E string
The string display indicates the sound
range of a standard guitar.
For tuning a bass guitar, use the 12th fret
harmonics (one octave up).
3-digit LED ... Indicates the tuning status.
---
The input level is too
low (cannot detect the
pitch).
The pitch is more than
±50 cents away from the
displayed string.
1 The pitch is within ±50
cents of the displayed
string.
11
The pitch is within ±10
cents of the displayed
string.
111
The pitch is within ±2
cents of the displayed
string. (Tuned)
PRESET /USER ... Indicates whether the
pitch is high, low or
tuned.
OFF OFF The input level is too
low (cannot detect the
pitch).
OFF ON TI1e pitch is low.
ON ON
The pitch is within ±2
cents of the displayed
string. (Tuned)
ON OFF
The pitch is high.
To return to normal operation
(to leave tuning mode), press
the MANUAL switch.
*
Even when the tuning mode is activated
by operating switches on the main unit,
the tuning indicators appear on the
remote controller. Also, you can leave
tuning mode by operating the HR-MPS
main unit.