Sony HR-MPS Operating Instructions Manual page 52

52
-
.
System Mode
Configuring the Setup
Function
Three settings are possible on the
"SYSTEM: Set Up" screen.
FUNCTION A button: Adjusts the
display window contrast.
FUNCTION B button: Selects the
display mode.
If "NAME" is selected, the screen
displays only the memory location
name in large characters.
If "INFO" is selected, the screen
displays the memory name in regular
characters as well as information
such as the date the memory contents
were created and whether the
memory contents are protected or
not.
FUNCTION C button:
Selects the load
form.
If "AUTO" is selected, an effect is
automatically recalled from memory
when the operation dial or shuttle
ring is used to change the memory
number in play mode.
If "ENTER" is selected, effects are
recalled from memory in play mode
by using the operation dial or shuttle
ring to change the memory number
and then pressing the FUNCTION F
button. By pressing the FUNCTION
A button before pressing the
FUNCTION F button, you can check
which effect is in the selected
memory location before recalling it.
FUNCTION D button:
Selects the direct
level mode.
If "OFF" is selected, the direct level is
automatically set to-= (-infinity)
regardless of the level stored in
memory and "DRY /OFF' appears on
the play mode display.
If "PGM" is selected, the direct level
is set to the level stored in each
memory. (Refer to page 64.)
Setting the Time
This function is used to set the time and
date of this unit's built-in clock. Once the
clock is set, the time is automatically stored
in the user memory when you create and
save an effect.
FUNCTION A button:
Sets the Month.
FUNCTION B button:
Sets the Day.
FUNCTION C button:
Sets the Year.
FUNCTION D button: Sets the Hour.
FUNCTION E button:
Sets the Minute.
FUNCTION F button:
Starts the clock
after the settings are completed.