B&R Automation Panel 9 D Series User Manual page 63

4.1.6.3.2 RFID read/write unit
The RFID read/write unit is located on the front of the panel and can be used to read MIFARE and ISO 15693 tags.
The following transponder tags can be used with this RFID read/write unit:
Order number Short description
5A9010.43 Transponder tag, black housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9010.44 Transponder tag, white housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9010.45 Transponder tag, yellow housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9010.46 Transponder tag, red housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9010.47 Transponder tag, green housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9010.48 Transponder tag, blue housing, read/write, SLI, 1 kbit, 13.56 MHz
5A9020.43 Transponder tag, black housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
5A9020.44 Transponder tag, white housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
5A9020.45 Transponder tag, yellow housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
5A9020.46 Transponder tag, red housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
5A9020.47 Transponder tag, green housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
5A9020.48 Transponder tag, blue housing, MIFARE Classic, 1 kB, 13.56 MHz read/write
Information:
The tag must be help ca. 0.5 cm from the front of the device for the RFID read/write unit to function
properly (ISO 15693 and ISO 14443). Placing flush may cause a temporary loss of communication.
Information:
For additional information about the RFID read/write unit, see the technical description for the
5E9020.29.
Automation Panel 9xD - Hygienic design User's manual V 1.80
Technical data
63