Agitation Of The Spray Mixture Tank - Tecnoma VECTIS 800e Adjustments, Use And Maintenance

– USING THE MACHINE –
IMPORTANT
To avoid diluting the spray mixture, close the decompression return
valve (R).
1. Close the valve (R) located at the rear of the tank.
2. Place the valve handles in the positions shown
(6).
3. Set the PTO speed to between 200 and 540 rpm.
4. On the control unit or using the control handles,
open all of the sections. Spraying starts.
5. Spray in the field while driving .
IMPORTANT
Once is complete, switch quickly to agitation (see next paragraph).
ATTENTION
Never close the sections before stopping the PTO.
REMARK
The rinsing tank empties in approx. 1 minute!

5.8.9 - AGITATION OF THE SPRAY MIXTURE TANK

IMPORTANT
We recommend placing the spray mixture in suspension in the main tank:
• While moving around on-site.
• Before spraying operations.
Fig.28
MAy-2015
Fig.27

6
76