Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 58

– USING THE MACHINE –
IMPORTANT
In order to ensure that your machine is working correctly, the specifications of the "TECHNICAL
CHARACTERISTICS" paragraph in chapter MACHINE DESCRIPTION and the structures and
functions described in this chapter must be verified regularly by a
WARNING
Risk of snagging, dragging in and projection of foreign bodies in the danger zone of the drive
shaft when operating.
• Before each use, ensure that the drive shaft is in good working order and that it is correctly
assembled and locked. Ensure that a specialist is called in to solve any transmission problems.
• If the drive shaft is operating
◊ Respect the authorised drive speed for the machine before switching on the PTO on the tractor.
◊ Keep a safe distance from the drive shaft.
◊ Keep all persons out of the danger zone.
• In case of danger, stop the tractor's engine immediately.
WARNING
Phytosanitary products, health risks in case of accidental contact.
It is compulsory to comply with the manufacturer's indications to use these products in a safe way,
avoiding all contact with skin, eyes and mouth.
you must wear:
• Gloves and overalls that are resistant to chemical agents
• Waterproof safety footwear
• Face protection
• Protective goggles
• Breathing protection
• Etc.
In the event of an incident, consult a doctor and bring the label of the product.
IMPORTANT
BEFORE STARTING WORK
When the sprayer is coupled to the tractor, and all connections have been made (electrical and
hydraulic controls, drive shafts), add water to the various tanks (use fresh water for the rinsing and
hand wash tanks).
• Check the oil levels (pump, multiplier, oil tray, etc.)
• Check the pressure and the good condition of the tyres.
• Check the brakes are operating correctly if the machine is fitted with them.
• Grease all points on the machine fitted with a grease nipple.
MAy-2015
Tecnoma
authorised distributor.
58