Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 22

– GENERAL SAFETy –
3.6.9 - RISKS INCURRED IF THE SAFETY RECOMMENDATIONS ARE NOT FOLLOWED
Failure to follow the safety recommendations may
• entail potentially dangerous situations for persons, but may equally result in damage to the machine and the
environment.
• and consequently lead to unsuccessful defence against claims for damages.
3.7 - CLEANING, MAINTENANCE AND REPAIR
For general machine maintenance refer to chapter MACHINE MAINTENANCE
3.7.1 - CLEANING YOUR MACHINE
CAUTION
High-pressure cleaners
Do not direct the jet towards electric, hydraulic, compressors, motors, hydraulic tubing, seals, filler caps,
etc.
CAUTION
If you clean the machine with a high-pressure cleaner, you must change all the grease.
REMARK
Tecnoma
declines all responsibility for the use of parts and accessories that are not certified.
Once you have finished cleaning the machine,
• Check the fluid circuits and make sure that there are no leaks, and that no connections are loose.
• Immediately repair any damage.
3.7.2 - MAINTENANCE AND REPAIR
3.7.2.1 General considerations
• Maintenance and repair operations must be exclusively performed by qualified personnel.
• Always make sure that the machine and its accessories are kept in perfect working order.
• Make sure all the tanks are clean.
• Make sure that your machine is serviced according to the recommended service schedule.
• Before carrying out any operations on the machine, make sure it cannot start accidentally.
◊ Stop the engine and remove the key from the ignition
◊ Put the gear lever in neutral.
◊ Put the parking brake on
• Make sure all moving parts of the machine are stopped.
◊ Disengage the power take-off
◊ Stop all service fluids (air, oil etc.)
◊ Wait until all moving parts are completely stationary.
• Leave the engine, transmissions and any other systems that may be hot to cool down.
MAy-2015
.
22