Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 21

– GENERAL SAFETy –
◊ Disconnect the supply tubes in the recommended order, starting with the pressurised tubes (marked
red)
WARNING
Pressurised hydraulic oils
Hydraulic fluid that leaks form a circuit can penetrate the skin and cause serious injuries as well as
intoxication.
3.6.8.4 Pressurised tubes
• Never open a pressurised tube
3.6.8.5 Residual energy
DANGER
Residual energy
Residual energy may be present in the different systems (mechanical, hydraulic, pneumatic, electric or
electronic) on your machine.
3.6.8.6 Electrical installation
• Check that the battery terminals are correctly connected. Take care when
◊ Disconnecting, start with the negative pole
◊ Connecting, start with the positive pole
• Before working on the electric system, disconnect the battery.
• Only use recommended fuses (fire hazard)
• Before all electric welding operations, disconnect the battery and alternator, as well as all electric equipment
or electronic components
• Avoid the formation of sparks or flames in the vicinity of the battery.
• If the tractor battery needs recharging, disconnect all electric and electronic equipment.
• When installing electric or electronic equipment, make sure it does not interfere with any of the originally
installed systems.
3.6.8.7 Hydro-pneumatic accumulator
The hydro-pneumatic accumulator (nitrogen cylinder) is a system operated by gas pressure,
• Changing its exterior appearance by machining, welding, assembly, drilling or in any other manner
whatsoever is strictly prohibited.
• The hydro-pneumatic accumulator and its fittings must be maintained in proper working order at all times.
• Never exceed the maximum permissible pressure of the hydro-pneumatic accumulator.
• There must be no gas leakage.
3.6.8.8 Mixture tank
• Never enter the tank without it having previously been perfectly cleaned and without respiratory protection.
• Rinse the tank in order to avoid the accumulation of deposits, particularly of liquid fertilizer.
MAy-2015
21