Principle Diagrams Of The Spraying Circuit; Safety Pictograms - Tecnoma VECTIS 800e Adjustments, Use And Maintenance

– DECRIPTION OF THE MACHINE –

4.6 - PRINCIPLE DIAGRAMS OF THE SPRAyING CIRCUIT

IMPORTANT
Constant maximum pressure for using circuit: 15 bar
INCORPORATOR
VALVE
DISCHARGE
(B)
FILTRATION

4.7 - SAFETy PICTOGRAMS

The warnings and pictograms on the machine provide indications of the safety measures to be observed and help
prevent accidents (see chapter GENERAL SAFETY
Ensure that the warnings and pictograms remain clean and visible at all times. If they are damaged, you can order
new stickers from your
have the same stickers as the original parts.
WASH BOX
(G) (H)
VALVE
MIXING (F)
AUTONET
BUILT IN
(OPTION)
VALVE
3 bar
SPRAyING
SUPER
15/10 OUTLETS 18/10 PRECIJET
(OPTION)
COMPRESSION DISC
SPRAyING
15/10 OUTLETS 18/10 PRECIJET
COMPRESSION DISC
SOLENOID VALVES
SECTIONS
Tecnoma
approved dealer. When repairs are made, ensure that the spare parts used
FRON AGITATION
VALVE (D)
AGITATOR
FRONT
RELIEF
COCK
VALVE
15 bar
VALVE
ACCESSORy
(C)
REGULATION
VALVE
VITITRONIC
of this manual).
MAy-2015
LAV' TON
x2
MAIN
TANK
REAR AGITATION
AGITATOR
REAR
VALVE
SUCTION (A)
AUTONET
SUCTION
FILTER
SPRAy
SPRAyING
REGULAIR
PRESSURE
TRANSDUCER
PRESSURE GAUGE
DISC
VITITRONIC
RINSING
TANK
VALVE (E)
(OPTION)
12/10 OUTLETS
18/10 PRECIJET
PRESSURE
GAUGE
Fig.13
37