Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 14

– GENERAL SAFETy –
• Be extremely careful when hitching and unhitching the machine.
• When unhitched, the machine must be parked on a level surface with the hand brake engaged (use chocks
if necessary).
Remember that caution and care are the required to work in safety.
3.3 - USING CROP TREATMENT PRODUCTS
This crop sprayer was designed and built by our company to be used with the treatment products of your choosing.
To make sure that the sprayer functions correctly, please strictly follow the recommendations in the User Manual
provided .
As the user, you alone are responsible for following the recommendations given by the manufacturers of the
treatment products you use. The operator must also obtain an approved applicator's certificate and obey the
applicable legislation.
In particular, each user is advised to:
• check the pressure with clear water before incorporating products in the tank.
• Read carefully the treatment product manufacturer's label(s) and follow the instructions therein (dosage,
PPE, etc.);
• Avoid mixing the products unless their compatibility is specifically recognised by the manufacturer of the
phytosanitary products;
• Prevent air from entering the sprayer tank when filling to avoid the formation of foam and problems due to
overflow;
• Follow the precautions and warnings given by the manufacturer of the phytosanitary products, especially
for the storage of the treatment products, which should be kept in a locked room out of reach of children and
animals;
• Follow the precautions for recycling the packaging, in accordance with the recommendations of the
manufacturers of the phytosanitary products;
• Protect untreated areas;
• Contact the manufacturer of the phytosanitary product (or their representative) if you are in doubt, or if
information is missing.
After treatment, wash and change your clothes. Wash the tools that may have been contaminated.
MAy-2015
14