Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 108

– MACHINE MAINTENANCE –
Maintenance
• NEVER PEFORM SANDING OPERATIONS.
• Be sure to protect the distribution and spray elements (if necessary dismantle the components).
• Remove most of the rust using a metal brush or buff the areas needing repainting with 300 grade
sandpaper.
• Remove dust
• Use a brush or paint gun to apply an even coat of "Rustol RLS".
◊ Rusty surfaces require more attention (do not dilute).
→ "Rustol RLS" dries in 8 hours.
→ Average consumption : 1 litre for 15 m².
• After 48 hours, apply paint:
◊ 1st coat diluted by 10%
◊ 2nd coat undiluted.
CAUTION: please comply with all instructions shown on the product packaging.
MAINTENANCE AND PROTECTION PRODUCTS
Tecnoma
offers you an entire range of products that are perfectly suited for your sprayer
Name
2 litre sample pack
Litest, box (25)
Rustol Minium (1 litre can)
Spray can "Vert (green) Otan" (0.4 litres)
"Vert (green) Otan" (1Kg) can
Tube of silicone resin (100g)
Tube of transparent silicone paste (200ml)
Protective paint
For all usage, maintenance operations and any spare parts,
Please get in touch with the nearest authorised dealer.
The dealer has attended training courses on the evolution of
is perfectly qualifi ed to advise you on how to achieve optimum performance from your
sprayer.
S.A.S. Capital 1174400 € - B.P. 195 - 51206 EPERNAy - FRANCE
Tél. 03.26.51.99.99 - Fax : 03.26.51.83.51 - http:www.tecnoma.com
R.C.S. EPERNAy B 350 484 309 - APE 293D
GENERAL MAINTENANCE OF A SPRAYING DEVICE
May-2015
Code
9512401
9513901
901334
901155
901068
900598
901210
Consult your dealer
Tecnoma
27-05-2015
9959260_Entret-gene_GB.indd
equipment and
S D
99592 H
4 /4
108