Tecnoma VECTIS 800e Adjustments, Use And Maintenance page 11

– GENERAL INFORMATION –
2.4.2 - OPERATOR QUALIFICATIONS
2.4.3 - WORKING CONDITIONS
CONTROL STATION
The operator must not leave the work station while the machine is moving
unless for a particular maintenance operation (i.e. : filling).
DRIVING
Adapt your speed and driving to the terrain, roads and paths.
Turning angle
It is limited by the transmission characteristics. Exceeding this angle can be damaging to the
machine and void any machine guarantee.
Work speed
Move forward steadily and smoothly.
Working by night
Operate your machine with sufficient lighting, otherwise use artificial lighting. Contact your
Authorized Dealer or manufacturer for more information.
2.5 - INFORMATION FROM AUTHORISED DEALER
The Authorized Dealer must perform certain procedures when supplying a new
equipment.
The machines are made roadworthy under the responsibility of the Authorised
• Check that the machine delivered is compliant with the purchase order.
• Read the Operation and Servicing Manual and all Safety Instructions for the machines.
• Insure that the information indicated on the control lists before delivery and upon delivery are thoroughly
checked and are compliant before delivering
• The Authorized Dealer must give his customer complete instructions of the basic principles, operation and
servicing of the machine and the operating limits beyond which safety conditions would be hazardous and
inevitably become a danger to the user.
• The Dealer must give the customer the manuals of the machine.
2.5.1 - COMMISSIONING
Refer to chapter MACHINE COMMISSIONING
2.6 - INFORMATION ON OWNER
Tecnoma
thanks you for purchasing one of its sprayers
The machine is designed and constructed to offer several years of satisfactory operations. However, its operation
and life cycle depend in part on the manner in which it is used and serviced.
• Comply with the recommended safety requirements indicated throughout the manual. Refer to chapter
GENERAL SAFETY
• The machine can only be used, serviced and repaired by individuals fully conversant
with its mode of operation and safety procedures.
• Before using your machine, insure that you are familiar with all its controls and correct
use.
(into the manual of the machine)
Tecnoma
Technologies machines to their owners.
(into the manual of the machine)
May-2015
Tecnoma
machine and/or
Tecnoma
. Dealer.
11