Program Memory Function; Configuring A Program; (With Tracks You Want To Hear); Playing An Arranged Program - Sony CDX-71RF Operating Instructions Manual

Program Memory
Function
You can preselect the tracks you want to hear
and the order in which you want them to be
played back (from the discs in the changer
connected to the unit). This function is divided
into Program1 and Program2, each allowing
you to preselect up to 12 tracks. Furthermore,
once a program is registered, the track order is
preserved. Changing the disc order in the
changer will not affect the order in which the
tracks have been set for playback.
Notes
e This function works only when CD changers with
program memory function are connected.
* When a CD changer without program memory function
is connected, pressing the PGM/EDIT button for at least
two seconds will not cause the system to enter the
program edit mode. Instead, "SORRY" will appear in
the display.
e If you press the DSPL/CLOCK SET button momentarily
when the program edit mode is engaged, the disc number,
track number, and elapsed playing time of the currently
played track will be displayed for two seconds.
© If you press the Eco), Eos +) and AMS
buttons when the program edit mode is engaged, the
selected disc number and track number, and the elapsed
playing time will be displayed for 1.5 seconds.
e Pressing the reset button or disconnecting the back-up
line will erase the memorized program.
Current Program initial Program1 Indicator
PGM/EDIT
ENTER/DELETE
Configuring a Program
(With tracks you want to hear)
1 Press the PGM/EDIT button for more
than two seconds.
The system will enter the program edit
mode.
EMER Program1
r ~
cil
g j
=P {G7 4 Configuration
ma rims) Indicator
PGM EDT DISC
To configure Program2, press the PGM/
EDIT button once, quickly.
2 Play the track you want to enter into
memory.
3 Press the ENTER/DELETE button once,
quickly.
P! ENTER+
4 O To continue entering tracks, repeat
steps 2 and 3.
To finish arranging a program, press
the PGM/EDIT button for more than
two seconds.
When configuration is completed, the unit
returns to normal playback mode.
Notes
e Configuration has been completed but the program will
not play.
o "**WAIT**" appears on the display when the input
tracks data has not yet been read into the memory, or
when a disc has not been put into the unit.
e "**FULL**" appears on the display when you try to
input more than 12 tracks into a program at one time.
Playing an Arranged
Program
By pressing the PGM/EDIT button
quickly you can designate the
program(s) you wish to play.
The program will begin playing two seconds
later.
If you press the button during
program memory play, program memory play
will be interrupted, and playback of the
selected disc starts.
continue to next page —
uonoung Álouay uej6044/uonejado Huey) gy H