Switching The Fm/Am Tuning Step; Setting The Clock; Connecting A Usb Device; Connecting Other Portable Audio - Sony CDX-G1053UR Operating Instructions Manual

Switching the FM/AM
Tuning Step
Set the FM/AM tuning step of your country.
This setting appears when this unit is turned
off.
1
Press MENU, rotate the control dial
to select [GENERAL], then press it.
2
Rotate the control dial to select
[TUNER-STP], then press it.
3
Rotate the control dial to select
from [50K/9K], [100K/10K] or
[200K/10K], then press it.

Setting the Clock

1
Press MENU, rotate the control dial
to select [GENERAL], then press it.
2
Rotate the control dial to select
[CLOCK-ADJ], then press it.
The hour indication flashes.
3
Rotate the control dial to set the
hour and minute.
To move the digital indication, press SEEK
+/–.
4
After setting the minute, press
MENU.
The setup is complete and the clock
starts.
To display the clock, press DSPL.
6
GB

Connecting a USB Device

1
Turn down the volume on the unit.
2
Connect the USB device to the unit.
Connecting Other Portable
Audio Device
1
Turn off the portable audio device.
2
Turn down the volume on the unit.
3
Connect the portable audio device
to the AUX input jack (stereo mini
jack) on the unit with a connecting
cord* (not supplied).
* Be sure to use a straight type plug.
4
Press SRC to select [AUX].
To match the volume level of the
connected device to other sources
Start playback of the portable audio device
at a moderate volume, and set your usual
listening volume on the unit.
Press MENU and rotate the control dial.
Select [SOUND]  [AUX VOL] (page 11).