Recording In Analog (Analog Recording) - Sony MZ-N505 Operating Instructions Manual

Recording in analog
(Analog Recording)
The sound will be input from the
connected equipment as an analog signal,
but recorded digitally to the disc.
To connect to a sound source, an optional
line cable is required. When connecting
the cable, make sure to insert the
connectors firmly.
CD player,
cassette recorder,
to LINE OUT jacks, etc
REC
to LINE IN (OPTICAL)
*
Use the
connecting
cords without an
attenuator. To connect to a portable
CD player with a stereo mini-jack,
use the RK-G136 connecting cord.
For more information on connecting
cords, see ("Optional accessories",
page 64).
1
Press I, while pressing REC.
REC indication lights up in the
display and recording starts.
2
Play the source you want to record.
For other recording operations, see
"Recording an MD right away!
(Sync hro-recording)" (page 16).
.' ' '.
c
LINE IN (OPTICAL) jack is for both digital
and analog input.
The recorder automatically recognizes the type
of line cable and switches to digital or analog
input.
/Vote
If you temporarily stop a recording operation
by pressing I I, a track mark will be added at
that point when you press II again
to resume
recording. The recording continues from a new
track.