5.2. General Notes for Installing a Rectifier
1
Fig. 5-2 APR48-3G Rectifier
• To reduce the risk of electric shock and maintain optimum system cooling, always
cover empty rectifier slots with blanking panels.
• To avoid electric shock do not place hands inside the rectifier shelf.
• Do not attempt to disassemble faulty rectifiers. Return them for service or
replacement in their original packaging.
Copyright © 2008-2009 Eaton Corporation. All Rights Reserved
Flexi -3G Installation & Commissioning Manual
2
3
4
Document No: - 4493-CM-EN-10989402
Chapter 5. Rectifier Installation
1
Power On LED
2
Minor Alarm LED
3
Major Alarm LED
4
Retaining Screw
For details of rectifier alarms see Fault
Finding in the SC200 Manual (see section
1.3. Related Information on page 5)
(Green)
(Yellow)
(Red)
Page 49 of 94