Isuzu D-MAX 2020 Owner's And Driver's Manual page 781

Replacement of Wiper Rubber Insert (Design Blade Type)
Pull
Insert
Replacement of Wiper Rubber Insert (Flat Blade Type)
SERVICE AND MAINTENANCE
Removal
1. Remove the wiper blade from the
2. Pull the wiper rubber insert in the
Installation
1. Insert a new wiper rubber insert into
RTUL60SH005801
Hole
2. Continue pushing in the wiper rubber
RTUL60SH005701 3. Attach the wiper blade to the wiper
RTUL60SH007101
• On flat blade type, the wiper rubber
RTUL60SH010101
wiper arm.
direction indicated by the arrow and
extract it from the wiper blade.
the wiper blade.
insert until the wiper blade's hook
engages with the hole in it, and
then confirm that the rubber insert is
securely held in place.
arm.
NOTE
cannot be replaced. When you
replace the wiper rubber, replace
the wiper blade as an assembly.
6-105