Isuzu D-MAX 2020 Owner's And Driver's Manual page 708

6-32
SERVICE AND MAINTENANCE
Claw
Gasket
RTUF60SH004901
O-ring
RTUF60SH005101
Handling the Battery
18. Face the claw side of the new oil filter
element towards the oil filter cap, and
install by firmly pushing it in until the
claws latch on.
19. Make sure that the oil filter element
and oil filter cap are installed
straightly.
20. Lightly coat the gasket of the new oil
filter element and the O-ring of the oil
filter cap with clean engine oil.
21. Install and tighten the oil filter cap
by hand. Finally, tighten the cap to
the specified torque using a torque
wrench.
Oil filter cap tightening torque
25 N·m (2.5 kgf·m/18 lb·ft)
ADVICE
• When installing, make sure the
gasket and O-ring are not caught
in other parts. This could cause oil
leaks.
22. Install clips to the stays.
23. Return the battery and connect the
battery cables.
→ Refer to page 6-119
24. Replace the oil pan drain plug gasket
with a new one. Reinstall and tighten
the oil pan drain plug.
Drain plug tightening torque
83 N·m (8.5 kgf·m/61 lb·ft)