Isuzu D-MAX 2020 Owner's And Driver's Manual page 166

3-16
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
Cover
Battery
Battery
holder
Electronic Key
Battery used
Lithium battery
Model number: CR2032
Voltage: DC3V
1. Pull out the mechanical key while
pressing the button on the electronic
key.
Passive Entry and Start System
2. Pry open the cover by inserting a
flat-head screwdriver. Wrap a piece
of cloth or tape around the tip of the
screwdriver so as not to damage the
cover.
3. Remove the battery.
4. Insert a new battery and close the
cover.
• Be careful not to bend the electrode
RTUL30SH009001
when placing a new battery.
• When closing the cover, check that
there is no dust or hair or anything
Label
else caught underneath it. A poorly
sealed remote control unit could
become deteriorated.
• The QR code on the label shows
the serial number of the key.
RTUL30SH035701
5. Store the mechanical key in the
electronic key.
Number of
batteries
→ Refer to page 3-20
ADVICE
NOTE
1