Isuzu D-MAX 2020 Owner's And Driver's Manual page 606

Table of Contents

Advertisement

4-330
CONTROLS AND INSTRUMENTS
The attention assist detects weaving based on the vehicle's meandering patterns in the
lane and alerts the driver by a display on the MID and a buzzer.
WARNING
• The driver is responsible for safe driving. Always check the surrounding area
yourself to be safe when driving the vehicle.
• The attention assist does not operate in all situations. Also, it is not intended to
automatically correct the vehicle's weaving. Driving the vehicle by relying on the
attention assist system may result in an unexpected accident.
• If the stereo camera cannot detect lanes or if the stereo camera temporarily
stops or malfunctions, the attention assist does not operate.
CAUTION
• In the following cases, the attention assist may not operate normally.
- When driving on continuous curves
- When the vehicle speed changes significantly
- Immediately after the vehicle changes lanes
NOTE
• Whether the vehicle is weaving or not is recognized based on the drive data
in the past few minutes. Just after the vehicle starts weaving, it cannot be
recognized. Also, there are some cases where the system continues operating
even after the vehicle stops weaving.
• The attention assist is a function that alerts the driver. It is recommended to rest
when your concentration for driving becomes poor, such as when you get tired
or you do not pay attention to the road.
Attention Assist

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tf

Table of Contents