Isuzu D-MAX 2020 Owner's And Driver's Manual page 612

4-336
CONTROLS AND INSTRUMENTS
Manually Switching the Headlights Between High Beam
AHB indicator light
High beam indicator light
The AHB settings can be changed by using the user customization function on the
MID.
Automatic high
beam
and Low Beam
RTUL40SH044001
RTUL00SH002701
Settings of the AHB
Display indication
Enable
Mode
Disable
Switching to Low Beam
Move the light control switch lever to its
original position while the AHB is operating.
The AHB indicator light turns off.
Switching to High Beam
When the light control switch is set to the
" " position while the AHB is operating,
the headlights switch to the high beam.
The AHB operation light turns off, and the
high beam indicator light comes on.
Settings (User Customization Function)
→ Refer to page 4-46
Turns on the AHB
Turns off the AHB
Description