4-112
CONTROLS AND INSTRUMENTS
(Models with Passive Entry and Start System)
Indicator light
Engine Start/Stop Button
This button is used to start/stop the engine
and switch the power mode.
To change the power mode, push the
engine start/stop button when the brake
pedal (models with automatic transmission)
or clutch pedal (models with manual
transmission) is not depressed and while
the electronic key is on your person. The
power mode will switch from "OFF" to
"ACC" to "ON" in that order each time the
button is pushed.
OFF
ACC
RTUL40SH000601
ON
: In this mode, the steering wheel
will be locked to help prevent
theft.
: In this mode, the audio and other
accessories can be used with the
engine stopped.
: The power mode stays in
this mode while the engine is
running.
All electrical components can be
used.