Isuzu D-MAX 2020 Owner's And Driver's Manual page 409

Automatic Windshield Wiper
When the windshield wiper switch is in the "AUTO" position, the wiper operates
automatically according to rainfall as follows.
Rainfall
No rain
Light rain
Moderate rain
Heavy rain
*: The interval between wiper sweeps changes according to the rainfall.
High sensitivity
to rain
Adjustment ring
Display indication
Wiper Automatic wiper
CAUTION
• When not using the wiper, set the windshield wiper switch to the "OFF" position.
When the engine is started, if something touches the rain and light sensor, or
the windshield vibrates, the wipers may operate unexpectedly. Be careful that
your fingers etc. are not pinched by the wipers.
CONTROLS AND INSTRUMENTS
Low sensitivity
to rain
RTUL40SH044501
Enable
Disable
Wiper state
Stopped
Intermittent*
Low speed
High speed
The sensitivity of the sensor to rain can
be adjusted to 4 levels by turning the
adjustment ring.
The settings of the automatic windshield
wiper can be changed by using the user
customization function on the MID.
When the automatic windshield wiper is off
and the windshield wiper switch is set to
the "AUTO" position, the wiper functions as
a variable intermittent windshield wiper.
Settings (User Customization Function)
→ Refer to page 4-46
Turns on the automatic
windshield wiper.
Turns off the automatic
windshield wiper.
4-133
Description