Isuzu D-MAX 2020 Owner's And Driver's Manual page 453

Hill descent control indicator light
CONTROLS AND INSTRUMENTS
3. When driving, the hill descent control
RTUH00SH001001
• The system will automatically
control the brakes to prevent the
vehicle speed at the time of hill
descent control operation from
being exceeded.
• When the hill descent control is
in operation, the stop lights will
operate.
• When the hill descent control is in
operation, it is possible to depress
the brake pedal to decrease speed
or to depress the accelerator to
increase to a vehicle speed of
30 km/h (19 MPH) or less.
• When the hill descent control is
activated, the hill descent control
may also operate when traveling on
a flat road or making a U-turn.
will operate when all of the following
conditions are met. When the hill
descent control is in operation, the
hill descent control indicator light will
flash.
• Steep slope
• Vehicle speed is between a very low
speed and approximately 30 km/h
(19 MPH)
• Accelerator pedal is not depressed
NOTE
4-177