Isuzu D-MAX 2020 Owner's And Driver's Manual page 398

4-122
CONTROLS AND INSTRUMENTS
High beam indicator light
High beam indicator light
Switching between High Beam and
Low Beam
With the headlights on, move the light
control switch lever forward and backward
to switch between the high beam and low
beam.
Moving the lever forward selects high
beam; moving the lever backward selects
low beam.
While the headlights are on high beam, the
high beam indicator light on the instrument
panel remains on.
When the Light Does not Come On
RTUL40SH043801
Switching between High and Low
Beams (Flash-to-Pass Signal)
By lightly pulling the light control switch
lever and releasing it, the high beam
comes on and off. At the same time, the
high beam indicator light on the instrument
panel comes on and off. Use this function
as a signal for flash-to-pass a vehicle or
other purposes.
RTUL40SH043901
→ Refer to page 7-24