Isuzu D-MAX 2020 Owner's And Driver's Manual page 225

PRE-DRIVING OPERATIONS AND ADJUSTMENTS
WARNING (Continued)
• Wear the seat belt as low as possible around the hips, not around the waist. A
seat belt running over the waist would press the abdomen with a strong force
and could increase the likelihood of injuries in a collision or sudden stop.
• Remove any twists in the seat belt before fastening it. A seat belt with twists will
not provide full protection because it cannot disperse shocks efficiently in the
event of a collision or sudden stop.
• Be sure to insert the latch plate into the buckle until a click is heard. An
incompletely inserted latch plate is dangerous in the event of a collision or
sudden stop.
• Too much slack could increase the amount of injury because the belt would not
be able to properly restrain you in an accident.
• Never place your child's armpit over the shoulder belt.
• When using the second seat center seat belt, make sure that each latch plate
and buckle are securely locked.
Buckle
Latch plate
To Fasten the Three-Point Seat Belts
1. Sit on the seat in the correct position.
2. Pull out the seat belt holding the latch
plate. After checking that there are no
twists in the belt, insert the latch plate
into the buckle until it clicks.
3. Position the belt across your lap as
low on your hips as possible and
adjust it to a snug fit by pulling the
shoulder portion upward through the
RTUL30SH014501
latch plate.
4. Adjust the driver's and passenger's
shoulder belts for proper position by
means of the shoulder anchor.
Shoulder Anchor Adjustment
3-75
→ Refer to page 3-80