Isuzu D-MAX 2020 Owner's And Driver's Manual page 707

Oil filter element
Oil filter cap
Protrusion
SERVICE AND MAINTENANCE
RTUF60SH005001
O-ring
RTUF60SH006101
11. Using a socket wrench, loosen the oil
filter cap.
12. Wait for approximately 30 seconds.
13. Remove the oil filter cap.
ADVICE
• If you remove the oil filter cap
immediately after loosening, engine
oil may overflow.
14. Remove the oil filter element from the
oil filter cap.
ADVICE
• Drained oil must be disposed of in a
method conforming to the regulatory
requirements in your country.
NOTE
• Engine oil will drip from the removed
oil filter. Catch the engine oil with a
workshop rag, etc.
15. To ensure that the new oil filter
element makes good contact, wipe
the protrusion inside the oil filter cap
using a clean workshop rag, etc.
16. Remove the O-ring from the oil filter
cap and wipe the O-ring mounting
surface using a clean workshop rag,
etc.
17. Install a new O-ring to the oil filter
cap.
6-31