Isuzu D-MAX 2020 Owner's And Driver's Manual page 504

4-228
CONTROLS AND INSTRUMENTS
WARNING (Continued)
- The front vehicle is suddenly steered, accelerated, or decelerated
- When an object is outside the range of the headlights' illumination
- An object has run out from the side just in front of your vehicle
- Your vehicle changes lanes and comes close to just behind the preceding
vehicle
• In the following situations, the stereo camera may not detect lanes or it may take
a longer time to detect them.
- Lanes are too narrow or too wide
- The width of the vehicle lane changes
- The shape of lanes changes drastically (such as at the start or end of curves,
at speed limiting systems, on continuously curving roads, or in branching
lanes)
- Lane markings do not exist or are fading
- The lane marking colors are similar to the road color
- Lane markings are drawn in yellow
- Lane markings are drawn twice
- Only one side of the lane marking is drawn
- Multiple lane markings are adjacent
- There are lines that are indistinguishable from lane markings, such as leftover
lines from road construction
- Driving astride a lane due to lane restrictions
- Lane markings are blurred or dirty
- The lane marking is impossible or difficult to see due to sand or dust
- A wall or pole is adjacent to the lane
- Shadows, such as of guardrails, cover the lane
- There are embedded road reflectors, stones, etc.
- Driving on a wet road, such as in rainy weather, after rain, or a road with
puddles
- Lane markings are drawn on a curbstone, etc. or outside the road
- There are curbstones or side walls on the road shoulder
- Driving on a road that is shiny due to reflections, etc.
- Immediately after changing lanes or passing an intersection
- Your vehicle is too close to the front vehicle