Isuzu D-MAX 2020 Owner's And Driver's Manual page 762

6-86
SERVICE AND MAINTENANCE
WARNING
• A disc wheel, wheel bolts or wheel nuts in any abnormal condition could break
later, causing the wheel to be detached from the vehicle while driving.
• If you find anything abnormal with wheel bolts, wheel nuts or disc wheels when
you check them, avoid driving the vehicle and contact the nearest Isuzu Dealer.
• Do not repaint any mating surfaces, wheel nut seating surfaces (tapered
surfaces) and hub fitting surface of the disc wheel. Thick paint films would cause
loosened or broken wheel bolts.
• Do not assemble the wheel in a slanted state or with the center of the wheel
misaligned state.
• Never apply oil or grease to the wheel bolts or nuts. By applying them, nuts may
become over-tightened and cause damage to the bolts. Wheel nuts or bolts
may loosen, causing the wheels to fall off and cause serious accidents. If oil or
grease is found on any bolt or nut, clean it off.
CAUTION
• Change wheels only when the tire is clear of the ground. Otherwise, the wheel
will be installed improperly and the operation of the vehicle will be affected
adversely.
• Remove mud and rust from the hub fitting surface or wheel-to-wheel mating
surfaces. Otherwise, the wheel might become loose while driving.
Installing a Wheel