Isuzu D-MAX 2020 Owner's And Driver's Manual page 246

3-96
PRE-DRIVING OPERATIONS AND ADJUSTMENTS
WARNING
• When using an ISOFIX lower anchorage/ISOFIX top tether anchorage, check
whether your i-Size/ISOFIX CRS is a product that has received UN (ECE) R44
or UN (ECE) R129 certification.
• When using the CRS with the top tether belt, be sure to fix a top tether belt to
the top tether anchorage.
• Before installing the CRS, remove the headrest. When using only a booster
cushion, put it in the use position without removing the headrest.
• When using the ISOFIX lower anchorage, make sure that there are no
obstructions in the surrounding area and that the seat belt is not trapped.
• Do not adjust the seat after you have fixed the CRS.
Installation Procedure
Lock button
Seat belt
RTUL30SH034501
ISOFIX
RTUL30SH032401
CRS with ISOFIX top tether anchorage
Procedure No. 1) → 5)
CRS without ISOFIX top tether anchorage
Procedure No. 1) → 2)
1. Remove the headrest.
2. Attach the CRS by using the seat belt
or the ISOFIX anchorages. Refer to
the instruction manual of the CRS.