Isuzu D-MAX 2020 Owner's And Driver's Manual page 301

Illumination of Center Display
Light sensor
CONTROLS AND INSTRUMENTS
When the power mode is "ON" (models
with passive entry and start system) or the
starter switch is in the "ON" position (models
without passive entry and start system),
the illumination brightness is automatically
adjusted according to the brightness
inside the vehicle. The initial setting is
"Automatic". By changing to "Manual", the
illumination brightness of both the meter
and MID can be individually set.
Perform "Manual" setting at "Illumination
mode" displayed in the MID main routine,
after changing from "Automatic" to
"Manual" in "Illumination mode".
Multi-Information Display (MID)
RTUL40SH007701
• Do not place any objects in front of
the sensor. Doing so will reduce the
sensitivity of the sensor, and will not
operate properly.
→ Refer to page 4-26
CAUTION
4-25