Isuzu D-MAX 2020 Owner's And Driver's Manual page 112

2-56
IMPORTANT INFORMATION
NOTE
[Creep]
• With the engine running and the selector lever in a position other than "P" or "N"
selected, power is transmitted to the wheels even when the accelerator pedal is
not depressed, causing the vehicle to tend to move. This phenomenon is called
creep. The higher the engine speed, the stronger the creep and the greater the
vehicle's tendency to move.
Automatic Transmission Model
RTUL20SH004901
On an automatic transmission model,
there is no need to use a clutch pedal; you
can pull away, change gears and stop the
vehicle by only using the selector lever,
accelerator pedal, and brake pedal. Be sure
to learn the characteristics of the automatic
transmission model and how to correctly
operate it. When the vehicle is stationary,
remember to keep the brake pedal firmly
depressed and, if necessary, place the
selector lever in "P" or "N" position and
apply the parking brake.
Immediately after engine startup, while the
air conditioner is running, the engine speed
automatically rises. As this makes creep
stronger than it is at other times, be sure to
keep the brake pedal firmly depressed.
Automatic Transmission
→ Refer to page 4-147