Isuzu D-MAX 2020 Owner's And Driver's Manual page 566

4-290
CONTROLS AND INSTRUMENTS
Main switch
MSL indicator light
SET switch
Setting the MSL
1. Press the main switch to set it to
"ON". The MSL indicator light comes
on white.
• If the cruise control or adaptive
cruise control is set to on when the
main switch is pressed, press the
main switch again to switch to the
MSL.
RTUL40SH032201
2. Press the SET switch to set the
speed.
When the vehicle speed is 30 km/h
(20 MPH) or more, the vehicle speed
at that time is set as the set speed.
When the vehicle speed is less than
RTUL00SH029001
30 km/h(20 MPH), the set speed is
set to 30 km/h (20 MPH).
The set speed is displayed on the
MID. At the same time, the MSL
indicator light comes on green.
Each time the switch is pressed and
then immediately released, the set
speed increases by 1 km/h (1 MPH).
By pressing and holding the switch,
RTUL40SH032301
the set speed increases in 5 km/h (5
MPH) increments.
NOTE