Christie BOXER 30 User Manual

Hide thumbs Also See for BOXER 30:

Technical reference (65 pages)

Installation and setup manual (52 pages)

Service manual (113 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

U se r Ma n u a l

020-102016-02

Boxer 30 (Bb.2)

Table of Contents

Summary of Contents for Christie BOXER 30

Page 1 U se r Ma n u a l 020-102016-02 Boxer 30 (Bb.2)
Page 2 The warranty does not apply to any product where the serial number has been removed or obliterated. The warranty also does not apply to any product sold by a reseller to an end user outside of the country where the reseller is located unless (i) Christie has an office in the country where the end user is located or (ii) the required international warranty fee has been paid.
Page 5 Boxer 30 signal connectivity........
Page 6: Introduction
Read all safety and warning guidelines before installing or operating the projector. This projector must be operated in an environment that meets the operating range specification. Use only the attachments and/or accessories recommended by Christie. Use of others may result in the risk of fire, shock, or personal injury.
Page 7: Light Intensity Hazard Distance
0 to 3.1 3.1+ 3.89-5.43:1 HB zoom lens 144-108100-XX 0 to 4.2 4.2+ 4.96-7.69:1 HB zoom lens 144-109101-XX 0 to 6.0 6.0+ Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 8: Product Safety Labels
Always disconnect all power sources before performing maintenance or service procedures. See the product service manual for specific information and directions. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 9: Projector Overview
Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...
Page 10: How The Projector Works
New LCD display to provide information at-a-glance How the projector works The Boxer 30 accepts a variety of input signals for projection on front or rear projection screens, typical in commercial or other large screen applications. High-brightness light is generated by six mercury vapor lamps, then modulated by three Digital Micromirror Device (DMD) panels responding to incoming data streams of digitized red, green and blue color information.
Page 11: Projector Components
Provides access to the lamp-side air filter. Projection lens A variety of lenses can be used with the projector. Available lenses are listed in accessories. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 12: Ir Remote Keypad
One of the two IR sensors on the projector will detect the signal and relay the commands for internal processing. The remote also offers a connector for wired connections to the projector. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 14: Side Panel Display Components
Controls Projector Information Provides information about the projector such as the projector name, serial number, software version, and projector ID. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 15: Turning The Projector On
Solid Error in Projector is in standby. An error exists that standby prevents the projector from starting up. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 16: Projector Led Shutter Indicators
2. To turn off power to the projector, disconnect from AC power. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 17: Adjusting The Image
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Selecting screen image orientation Specify the orientation to use for the image. The projector supports front projection, rear projection, front projection inverted, or rear projection inverted.
Page 18: Adjusting Lens Settings
6. Use the up and down arrows to adjust the focus of the image. 7. To exit, select Back. 8. To refine your adjusts, repeat steps 2 to 7. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 19: Locking The Lens Motor
10. To reset the primary colors to their defaults, select Reset Color Primaries. 11. At the confirmation prompt, select OK. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 20: Dmd Color Correction
The gamma function options adjust the color values of the inputted signal to give you a more detailed picture. 1. Select MENU > Image Settings > Color & Gamma > Gamma Function. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 21: Selecting The Color Correction Mode
4. To set the achievable frame delay, select Actual Delay. 5. Adjust the value and to confirm your selection, select Enter. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 22: Enabling Film Mode Detect
10. Repeat steps 2 to 9 for the remaining projectors. 11. To turn off edge blending, from MENU > Configuration > Edge Blending, select Off. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 23: Geometry Correction
Adjusting horizontal or vertical keystone correction after 2D keystone erases the 2D keystone settings; however, performing 2D keystone after horizontal or vertical correction retains the previous keystone setting. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 24 Reset keystone to revert the distorted image shape back to default values. 1. Select MENU > Configuration > Geometry Correction. 2. Select Reset Keystone Correction. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 25 Adjusting the image 3. At the confirmation prompt, select Reset. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 26: Configuring System Settings
1. Select MENU > System Settings > Splash Screen Settings > Background Color. 2. Select a splash screen background color: • Black • • Green • Blue 3. Select Enter. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 27: Determining The On-Screen Display Position
7. To enable a wired version of the remote, select Wired Keypad Enabled and select Enter. By default this feature is enabled. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 28: Setting The Remote Access Level
1. Select MENU > Configuration > Lamp > Lamp Power. 2. Press Enter. 3. To adjust the lamp power, use the slider. 4. To confirm your selection, select Enter. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 29: Brightselect
3. To set the system to automatically turn on a deselected lamp if one of the selected ones fails to maintain the required level of brightness, select Enable automatic lamp redundancy. 4. Select Apply. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 30: Setting Up Projector Profiles
Return the projector to the configuration specified in a specific projector profile. 1. Select MENU > Admin > Projector Profiles. 2. Select an existing profile. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 31: Renaming A Projector Profile
1. Select MENU > Admin > Projector Profiles. 2. Select the profile you want to delete. 3. Select Delete Profile. 4. At the confirmation prompt, select Delete. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 32: Backup, Restore, And Upgrade Projector Files
5. To save the name, navigate down and select SAVE. The backup file is exported to the USB flash drive. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 33: Importing A File From An External Device To Restore Settings
1. From the home page, select MENU > Admin > Backup & Restore. 2. Select Reset Projector Defaults. All customized settings are set to the default projector settings. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 34: Diagnostic Tools
For example, in moving images sometimes it is difficult to observe artifacts such as external de- interlacing/resizing and signal noise. 1. Select MENU > Admin > Diagnostics. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 35: Test Patterns
6. To change the slope of the ramp test pattern, select Test Pattern Ramp Slope and adjust the slider to the value you want. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 36: Modifying Grid Test Pattern Characteristics
The near field communication (NFC) mobile app, called Christie TAP, enables Android devices to communicate with the projector, regardless if the projector is powered on or not. 1. From the Google Play Store, download the Christie TAP mobile app to your compatible Android device.
Page 37: Running The Projector Interrogator
Diagnostic tools Running the projector interrogator The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct projector issues. 1. Insert a USB flash drive in the USB port on the projector. If two USB flash drives are inserted, the first flash drive inserted is the one recognized. The USB flash drive must be formatted using the FAT 32 file system.
Page 38: Defining A Trap Ip Address
2. Enter the service password. 3. Select Reset Factory Defaults. All customized settings are set to the default factory settings. Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 39: Specifications
= 0.300 +/- 0.050 Gamma Nominal 2.2 ± 5% Control signal compatibility Ethernet port Interface 10Base-T/100Base-TX Connector Female RJ-45 Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 40: Optional Input Cards
The projector shutdowns within one minute of an error threshold being reached. Location Warning Error Remarks (°C) (°C) Air intake IMXB CPU IMXB FPGA Backpane Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 41: Warning Thresholds For Fans
Learn the warning thresholds (in RPMs) for each fan. All fan warnings are set to ~75% of their normal operating speeds. Location Warning Bulb blower B3 Bulb blower B2 Bulb blower B1 Bulb blower A3 Bulb blower A2 Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 42: Warning Threshold For Liquid Cooling Module
Warning threshold for liquid cooling module Learn the warning thresholds (in RPMs) for the liquid cooling components. Location Warning Liquid cooling pump 180 RPM Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 43: Power Requirements
Projector weight Without lens 73 kg (160 lbs) Shipping without lens (includes packaging) 95 kg (210 lbs) Operating position Omni-directional Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 44: Accessories
(EMC). Safety • CAN/CSA C22.2 No. 60950-1 • ANSI/UL 60950-1 • IEC 60950-1 • EN 60950-1 • IEC 62471-1 Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 45: Approvals
China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by electronic information products, hazardous substances concentration limits (SJ/T11363-2006), and the applicable product marking requirements (SJ/T11364-2006). Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 46: Environment
Humidity (non-condensing) 10 to 80% Altitude 3000 meters (10,000 feet) maximum Non-operating environment Temperature -40 to 70°C (-40 to 158°F) Boxer 30 (Bb.2) User Manual 020-102016-02 Rev. 1 (02-2016) Copyright 2016 Christie Digital Systems USA Inc. All rights reserved. ©...
Page 48 Corporate ofﬁ ces Worldwide ofﬁ ces USA – Cypress Australia Eastern Europe and India Singapore ph: 714-236-8610 ph: +61 (0) 7 3624 4888 Russian Federation ph: +91 (080) 6708 9999 ph: +65 6877-8737 ph: +36 (0) 1 47 48 100 Canada –...

Christie BOXER 30 User Manual

Introduction

Adjusting the Image

Configuring System Settings

Setting up Projector Profiles

Backup, Restore, and Upgrade Projector Files

Diagnostic Tools

Specifications

Quick Links

Related Manuals for Christie BOXER 30

Summary of Contents for Christie BOXER 30

Table of Contents