Replacing the lamp door interlock—Design A
The lamp door interlock prevents the projector from operating when the lamp door is open.
Estimated replacement time: 8.5 minutes
1. Remove the rear cover (on page 35).
2. Remove the top cover (on page 34).
3. Remove the optics-side cover (on page 35).
4. Remove the four screws to release the rear electronics bracket.
5. Release the two harnesses from the clip to the rear of the electronics bracket.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Electronics
62