Filtration; Replacing The Front Air Filters - Christie Boxer 4K Series Service Manual

Hide thumbs Also See for Boxer 4K Series:
Table of Contents

Advertisement

Filtration

Filters help to reduce the effects created by dust, smoke, fog, and other foreign materials from
entering the projector.
Notice. If not avoided, the following could result in property damage.
Do not operate the product without the filter installed.
Do not reuse an old air filter.

Replacing the front air filters

The front air filters are located on either side of the projection lens: one of the electronics side and the
other on the lamp side.
Estimated replacement time: 1.5 minutes
1. To open the electronics-side filter door, remove the two screws from the door.
2. Repeat the previous step for the lamp-side filter door.
3. Remove the used filters.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
38

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Boxer 4k30Boxer 4k20Mirage 304kBoxer 30

Table of Contents