Cleaning Or Replacing Fold Mirror 2 - Christie Boxer 4K Series Service Manual

1. Remove the front cover (on page 33).
2. Remove the radiator (on page 57).
3. Loosen the two captive screws securing and remove the radiator bracket.
4. To remove the radiator fan pack, press on the two tabs.
5. Remove the three screws securing fold mirror 1 adjust module.
6. Remove the four screws securing fold mirror 1 retaining clamps.
7. Remove the retraining clamps.
8. Drop fold mirror 1 out of the fold mirror 1 adjust module.
9. Clean or replace fold mirror 1 as required.
10. To re-install, follow these steps in reverse order.
11. After replacing fold mirror 1, power on the lamp in single-lamp mode and adjust the fold
mirror 1 before powering on in six-lamp mode.

Cleaning or replacing fold mirror 2

Fold mirror 2 is located behind the bottom cover. It folds the light back into the light engine.
Estimated replacement time: 4 minutes
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
85