6. Slide the housing clear to access the light lock sensor screw.
7. Remove the screw.
8. Disconnect the light sensor harness.
9. Remove and replace the relay optics housing.
10. To re-install-follow these steps in reverse order.
Cleaning or replacing fold mirror 1
Fold mirror 1 is located below the LiteLOC sensor and provides the first light bend to getting the light
directed towards the light engine.
Estimated replacement time: 15 minutes
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
84