Replacing The Integrator Module - Christie Boxer 4K Series Service Manual

21. Ensure the three mini-SAS harnesses are routed properly so none of them interfere with the
fan in the light engine area. For more details refer to replacing the mini-SAS harnesses (on
page 91).

Replacing the integrator module

The integrator module is positioned between the two lamp cartridges and captures light from up to six
lamps and combines it into a uniform rectangular light source for the light engine.
Estimated replacement time: 16 minutes
Warning! If not avoided, the following could result in death or serious injury.
• Always handle optics by their edges.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
77