Page 1
User Guide 020-101777-16 Boxer 4K Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1)
Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Introduction This manual is intended for Christie qualified installers and trained operators of Christie Boxer 4K projection systems. For complete Boxer 4K product documentation and technical support, go to www.christiedigital.com. Safety and warning guidelines Read all safety and warning guidelines before installing or operating the projector.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
Page 11
Explosive material hazard. To avoid personal injury, disconnect all power sources before performing maintenance or service, and wear Christie-approved protective clothing. Bright light hazard. To avoid personal injury, never look directly at the light source.
4K images at 60 frames per second. Contact your dealer Record the information about your projector and keep this information with your records to assist with the servicing of your projector. If you encounter a problem with your Christie projector, contact your dealer. Purchase record...
Introduction Product documentation For installation, setup, and user information, see the product documentation available on the Christie Digital Systems USA Inc. website. Read all instructions before using or servicing this product. Boxer 4K, Boxer 2K, Boxer 30 1. Access the documentation from the Christie website: •...
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Selecting screen image orientation Specify the orientation to use for the image. The projector supports front projection, rear projection, front projection inverted, or rear projection inverted.
• Show All Warnings—Shows all lens warnings. • Hide Zoom Motor Warnings—Hides zoom motor warnings. Christie recommends selecting this option when using a fixed lens as all zoom operations are disabled. • Hide Detection Warnings—Hides lens detection warnings. Christie recommends selecting this option when using a third-party lens.
Signal color correction Adjust the video signal color as required. For best results, Christie recommends setting all color and gamma settings to Auto Detect. Adjusting the color space Determine how the color components are decoded for accurate color in the display.
1. Create an edge blend file using the Twist or application. To connect Boxer 4K with Twist or , use port 3003. Christie Twist Premium, Twist Pro, and offer advanced warping options. Refer to the Christie website (www.christiedigital.com) for product information and documentation.
1. Create a warp file using the Twist or application. To connect Boxer 4K with Twist or , use port 3003. Christie Twist Premium, Twist Pro, and offer advanced warping options. Refer to the Christie website (www.christiedigital.com) for product information and documentation.
4. Select Apply. Enabling Camera Friendly Color mode Some digital camera equipment presents the images generated by Christie laser products with a noticeable red shift. These images do not represent how human vision perceives the projected image Boxer 4K User Guide–Boxer 4K20 (Bb.4) and Boxer 4K30 (Bb.1) 020-101777-16 Rev.
Page 40
To mitigate this, enable the Camera Friendly Color mode so the target white-point is set to a cooler color temperature. This significantly reduces the observed effect and Christie recommends using this mode for sites wanting to take photographs of the projected images. The target Camera Friendly White x and White y settings default to an appropriate value but can be modified in MENU >...
Not all options listed in the table are available on all products. Available options depend on the projector model and the cards installed on the projector. The QSFP+ options require the Enable Christie Link option to be set.
Configuration menu, or you can send the (SST+CONF?1) serial API command. Christie Technical Support will send a zipped license file to you. If you sent more than one serial number, you will receive multiple license files as the .key file is based on the serial number of the projector.
Backing up, restoring, and upgrading projector files 4. From the Start menu, select Christie > Twist 2.x > Projector License Utility. 5. In the Christie Projector License Utility dialog, select Browse. 6. Navigate to the location of the unzipped license file (.key) and select it.
The near field communication (NFC) mobile app, called Christie TAP, enables Android devices to communicate with the projector, regardless if the projector is powered on or not. 1. From the Google Play Store, download the Christie TAP mobile app to your compatible Android device.
Near field communication reader Warning! If not avoided, the following could result in death or serious injury. • Changes or modifications not expressly approved by Christie Digital Systems USA Inc. could void the user's authority to operate the equipment. •...
The list of formats listed below are not exhaustive and other formats may be supported. For more information, contact Christie Technical Support. For a list of supported Christie Link video formats, see the Christie Link User Manual (P/N: 020-102234-XX). HBMIC video formats Identify the video formats for the HBMIC card.