Replacing the power supply module fans
The power supply module fans provide cooling for the single power supply in the projector.
Estimated replacement time: 10 minutes for servicing a single power supply fan
1. Turn the projector on its side.
2. Remove the power supply module (on page 66).
3. Disconnect the inline fan connector.
4. Release the four rubber inserts securing the fan.
5. Replace the fan.
6. To re-install, follow these steps in reverse order.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
55