Christie Boxer 4K Series Service Manual page 79

10. To free the lamp blower fan pack, loosen the captive screw securing it.
11. Slide the lamp blower fan pack towards the front of the projector to release the assembly from
the tabs.
12. Disconnect the J73 and J74 harnesses.
13. Free the harnesses from the clips.
14. Remove the lamp blower fan pack.
15. Disconnect the J75 harness and route free from the harness clips.
16. Disconnect the J72 NFCR harness (A side).
17. To release the top lamp duct module, remove the three screws.
18. To remove the outside lamp duct, loosen the three captive screws.
19. Disconnect the J72 inline connection located at the electronics bracket.
20. Slide the outside lamp duct assembly to the front of the projector and remove it.
21. Remove the top lamp duct module.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
79