Replacing The Radiator - Christie Boxer 4K Series Service Manual

1. Remove the top cover (on page 34).
2. Remove the optics-side cover (on page 35).
3. Vent the LCM.
4. Disconnect the two hoses connected to the light engine (on page 23).
5. Release the hoses from the eight clips.
6. Disconnect the inline hose to the radiator.
7. Loosen the two captive screws securing the LCM.
8. Slide the LCM out and disconnect the LCM harness.
9. Replace the LCM.
10. To re-install, follow these steps in reverse order.

Replacing the radiator

The radiator provides the system cooling to the liquid in the liquid cooling module (LCM) and 4K light
engine.
Estimated replacement time: 6.5 minutes
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Ventilation and cooling
57