Christie Boxer 4K Series Service Manual page 93

3. Replace the A1, A2, and A3 NFCR harness:
a) Route the harness free from the four clamps.
b) Disconnect the harness connections to the A1, A2, and A3 NFC reader.
c) Disconnect the harness connection from the inline connector.
d) Remove the harness.
4. Replace the B1, B2, and B3 NFC reader harness:
a) Remove the lamp driver module (on page 65).
b) Disconnect harness connections from NFCR B1, B2, and B3.
c) Disconnect harness J72 from HKBA.
d) Release the harness from the three tension clamps.
e) Release the harness from inline connector bracket.
f) Remove the harness.
5. To install the NFCR harnesses, repeat these steps in reverse order.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Harnesses
93