The harnesses must be snug and clear of the fan.
7. Fold the longer blue mini-SAS harness and secure it along with the other harnesses with the
swivel clamp.
8. To secure the harnesses, apply the remaining two swivel clamps.
Replacing the NFCR harnesses
The NFCR harnesses are located on the panel mount connector.
Estimated replacement time: 10 minutes
1. Remove the top cover (on page 34).
2. Remove the optics-side cover (on page 35).
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Harnesses
92